Big Push to get her in the water:

last night with the help from a good friend, started the 2 day push to get my F25 in the water. after careful inspection of existing bottom paint decided to scrap and remove all the old paint off and get a fresh start. will sand bottom to 100 grit, install serviced sea cocks and paint tonight. I will post pics tomarrow for all to see.

cheers,

Holding Tanks

well I've been working on my holding tanks, for the F25 when I purchased my boat it did not have a waste holding tank as it was removed and the water holding tank was filled with antifreeze. I also would like to create more storage in the cabin and move weight forward and more central and close to the center of the boat if possible.

what I have found:

1. I have moved the existing water holding tank to the port side and will use for waste storage

2. I have used a rectangle plastic holding tank mounted vertically below the sink for fresh water

after a rough layout I'm happy with the new locations, and will be working on hose layout and fitment.

next for me is to reinstall the head and finish the repair to the head encloser and mounting.

Pics from add when I bought the boat: