GONZO my 1982 Freedom 25 sailboat

GONZO my Freedom 25 yacht:
This blog will document the continued restoration of my 1982 Freedom 25 sailboat, along with all the experiences I have. I purchased my F25 in the winter of 2009 from the 3rd owner who had the boat in NH. Gonzo has a composite rotating winged mast, yanmar inboard diesel, a Gun Mount spinnaker pole and staysail. This is my 1st cruising sailboat and I look forward to learning how to maintain and slowly restore and sail in Narraganset.

Monday, July 25, 2011

Freedom 25 outhaul upgrade:

This is a few pics of the upgrade and service to the outhaul system which is inside of the boom of my Freedom 25.

this pic is taken from gooseneck side of boom, it shows the entire outhaul system which is laying on the boom so you can see how it works.
upgrades:
1. upgraded line in purchase and down sized it's diameter to help it work more smoothly, est length of 25 feet. which puts the middle block in the middle of the boom allowing it to move freely away from through bolts.
2. removed cable which ran through shiv and attached to sail, and replaced with 3/16th 12 strand spectra with UV coating, this line has a 5,000lb breaking point, weighs less then half of cable and runs much smoother, and nothing to bind or rust.





This detail shows the spliced spectra to the block. I reduced the travel of the purchase so their was less line, and clutter in the boom. and ran a single line to end of boom. est length is 10'














This detail shows the end of spectra which replaced the cable, the boom end fitting with shevs are not in pic but you should get the point from the pic, the end of spectra is spliced and I have a captive stainless shackle to attach to the sail.

No comments:

Post a Comment